Reactive Blog #18 - How to Maintain Your Oven at Christmas

How to Maintain your Oven at Christmas

Everyone that owns an oven should perform routine maintenance checks, in order to keep the oven running at peak condition. If you want to keep your oven in good-working order in terms of longevity and performance, take some time to read this blog. If you follow the advice we offer, your Christmas dinner will be the best meal you’ve ever had!

Clean your oven regularly

We’ll start off with the obvious piece of advice: clean your over regularly. You should clean your oven at least twice a year, and if, like most people, you use it every single day it will need to be cleaned on a more regular basis.

We recommend you start by placing a bowl of water in the oven on a high temperature for 20 minutes. The steam produced will help loosen the dirt and grease, and once you’ve wiped the condensation away you are free to begin using cleaning products.

If your oven is enamel lined, smear a thin paste of bicarbonate of soda and water to prevent dirt build-up. Once dry, you’re left with a protective coating that absorbs greasy soiling, making the oven easier to clean next time.

To clean the racks, we recommend putting them in the dishwasher or soaking in a solution of biological detergent. Any remaining dirt and grease can be removed with a mild, abrasive cream cleaner.

Glass oven doors should always be cleaned when cool. Start off by removing dirt and grease with a plastic scraper, before wiping the glass with some washing-up liquid. If the dirt refuses to disappear, apply an oven cleaner on a nylon cleaning pad, ensuring you avoid the rubber trim.

Use your oven's self-cleaning feature

The self-cleaning feature on your oven should be safe to use, providing you’re following the guidelines written by the manufacturer. Stay home during the process and open a window to let the heat out. After the self-cleaning cycle, allow the oven to cool for at least six hours before wiping it down.

Don't clean under oven knobs

DO NOT attempt to clean under the oven knobs. Whilst cleaning the oven, ensure that you never remove the cooktop’s knobs. If you decide to pull them off and then proceed to clean around the area, you are essentially dousing an electrical system, which could cause the oven to short out or even electrocute you.

Unplug oven when cleaning with water

It’s very important that you unplug the oven when cleaning the inside of the oven by hand. Cleaning by hand almost always requires water so necessary precautions must be taken to eliminate the risk of electrocution.

Maintain the blower motor

The blower motor is one of the most important features of an oven. If it is not kept dirt-free, you run the risk of premature oven stoppage. Loose blanket insulation and other foreign materials may get caught in the blower assembly, creating an imbalance in the motor. Vacuuming or using an air jet is usually the most effective way to keep vent openings clean. Unless the motor is ball-bearing or pre-lubricated during production, you will need to keep the motor properly lubricated. If the motor is equipped with oil cups, lubricate with five drops of SAE 20 non-detergent oil at least twice a year. Apply the oil at the front and back of the motor where there are lubrication ports in the housing. If you’re unsure of how to do any of the above, check the instructions provided by the oven manufacturer.

Use the correct power

An oven operating on reduced power always results in poor performance. For example, if you have a 240 VAC oven on 208 VAC the oven will see a 20 percent reduction in power. So, if your oven is operating below expectations due to a lack of power, invest in a buck-boost transformer.

Replace the gas

If you decide to purchase a new gas oven, we advise you look into replacing the gas line. Moving the old one and swapping in the new one creates a lot of movement and vibration. Which could lead to leaks in the gas line. Replacing the line doesn’t take much money out of your pocket, and offers a major increase in safety.

Inspect your oven's burners

We recommend inspecting coil burners for deformities. A small spot on the coil that’s redder than the rest when the oven is in use means it’s about to short out, which could cause severe damage to both the burners and oven. Do not use that burner and arrange for it to be replaced immediately.

Plug unnecessary heat losses

Always use a port plug in the light socket when the oven isn’t currently in use. Your light socket could have a temperature rating that is exceeded by the rating of your oven. Using a port plug in the light socket reduces heat loss, as well as preventing the socket from getting damaged from the heat. If the port plug gets cracked or damaged it must be replaced.

It’s also worth inspecting the gaskets on the oven door, as well as other port inserts. Check periodically for breaks, torn gaskets and missing sections. If you can feel the heat escaping from the oven, the most common cause is torn gaskets.

Create a spill barrier

When you’re cooking your nice Christmas turkey, there’s a strong chance some of the juices and seasoning will spilt onto your oven. We recommend putting a small cookie sheet covered with tinfoil under your oven racks to catch any spillage from the food you cook. Just make sure you don’t block any vents in the oven. If that sounds like too much effort for you, ensure you clean up any mess in the oven as soon as possible; the longer the mess sits, the more it’ll burn.

Still having troubles?

If you are still experiencing issues you can contact us at: http://www.reactiveinsurance.co.uk/about/#contactus

Have a good Christmas! 

Reactive Blog #17 - Burst/Frozen Pipe Fixes

Why Freezing Pipes Burst

Not all freezing/frozen pipes burst. But when they do it's because water expands when it freezes, this adds a lot of pressure to the pipes. That pressure can cause a serious leak, unleashing flowing water into your home.

Water damage from burst pipes is one of the most common homeowner's insurance claims, with an average claim cost of about £3,000.

How to Identify Freezing Pipes

A water line coated in frost is a clear sign that it’s frozen. However, not all plumbing pipes are visible. If your taps don’t flow and your toilets won’t refill after a flush, that’s another clear sign your pipes are frozen.

How to Defrost a Frozen Pipe

Before you start anything, please shut off the water supply. It is best you do this for the entire house because the real trouble begins after the defrost. That’s because the frozen may be blocking lots of water from spilling out of the cracks in the pipes. When a blockage is removed water will come flowing out. It is best that you are ready at the scene with ready a mop, large bucket, and a few towels, just in case there’s an issue.

A good way to defrost the pipes is with a mini heater, heat lamp, or hair dryer, however, you will have to take serious precautions with this as we all know electric and water do not mix very well. Wrapping freezing pipes with thermostatically heat tape is also an effective way to quickly sort the problem.

Don’t defrost a pipe using a propane torch.

What to Do if a Pipe Bursts

If you walk in to discover burst pipes, immediately you should shut off the main water supply to reduce the flooding. Next, call your plumber whilst doing so or straight after.

Dry out the area using mops and towels to minimize mould, mildew, and other moisture-related problems, run a dehumidifier in the area until it’s very dry (if you have one).

Still having troubles?

If you are still experiencing issues you can contact us at: http://www.reactiveinsurance.co.uk/about/#contactus

Reactive Blog #16 - Christmas Decoration Life Hacks

Christmas Decoration Life Hacks

Christmas is just around the corner now, so here are some quick and easy life hacks to make the days coming up to Christmas a lot easier, we know it can be very stressful.

Wrap Christmas lights around a hanger to keep them from getting tangled.

Christmas tree light hack

If you put your Christmas tree goes in the corner of the room you can save yourself a lot of time. Instead of wrapping the lights around the whole tree, try stringing your lights in a zig-zag pattern down the front. This uses fewer strings so you may even save money on lights. Nobody will see the back of the tree anyway!

Outside lights hack

Another life hack for Christmas lights is to hang outside on brick with hot glue. This makes it easier to set them up and you could easily put them in a fancy pattern like this too! Just make sure you don't use this trick on stucco surfaces as it might cause them to melt.

Wreath hanging hack

There’s no need to make a mess and cause damage by putting put a nail in your front door to hang up your wreath. Instead, use an upside-down Command Strip to hang your wreath from the other side of the door, this will not affect the paint on your door when taking it off either.

Create ornaments out of the trunk of your Christmas tree.

The last one is a bit of a fun one. You can make sentimental tree ornaments from slices of your Christmas tree trunk. This is something you can do every year too, and build up a collection of them!

Reactive Blog #15 - Cold Weather Boiler Fixes

Cold Weather Boiler Fixes

So it's probably been a while since you’ve used your boiler now. We had a great summer but it's now time for the cold winter. You may experience boiler issues if you haven’t used it in a while, so here are some tips that may help you fix it before you call someone out to help.

Double check the basics

First things first: check the basics. If you have a prepayment meter system or a top-up key, check that you’ve got enough credit on it for it to work.

If this is not the case, then you should next test whether your other gas appliances, such as the cooking hob, are working properly. The switches in your fuse box may have tripped and may need resetting.

Think back to if you’ve had a power cut recently

Have you had a power cut recently? Your boiler’s timer might have reset itself. Fixing it and getting it working back to normal again should be as simple as putting in the correct time settings again. If you do not know how to do this, take a look at the instruction manual and there should be an easy-to-follow guide.

Check your boiler’s pressure gauge

If the boiler is showing a reading of one bar or less, then it is probably to do with the pressure being too low, as this can prevent the boiler from working. Topping up the pressure yourself is usually straightforward - follow the steps in your boiler’s manual.

Turn your room thermostat to 21 degrees or higher

Reset your boiler, or check that it's pilot light is on

Having the thermostat set lower than 19-21 degrees can stop your heating from coming on, so turn it higher to see if your boiler starts working again.

               

Still having troubles?

If you are still experiencing issues you can contact us at: http://www.reactiveinsurance.co.uk/about/#contactus